611082 LED floor dimmer 12V
The new Tradim floor dimmer model 611082 is suitable for dimming 12 V LED lamps such as G4
lamps such as G4, MR11 and GU5.3. The power is from 1 to 25 W/VA.
Using the slide switch, the lamp can be dimmed and can be
100% off. Inside there is an adjusting potentiometer to set the minimum dimming level.
can be set. The dimmer has a soft start for a favourable influence on the
life of the applied lighting. Dim range in low to 0.1%. Stand-by consumption
of only 0,3 watt. Extremely suitable for: G4, MR11 and LED strips. This dimmer is
extensively tested with lamps from Philips, Eglo, Calex and Segula.
The dimmer works according to the principle of PWM (Pulse-Width Modulation), this is a modulation technique whereby pulses are sent out at a fixed frequency, the width of which is varied.
The advantages of the PWM dimming technique are:
- smooth dimming possibilities
more accurate output levels
- better colour consistency between levels.
Thanks to this modulation technique, this dimmer is very suitable for dimming LED. The dimmer is an excellent replacement for switching from energy-consuming 12V halogen lamps to energy-efficient 12V dimmable LED lamps because of its integrated driver.
Click here for the user instruction video. Please note: the video is subtitled in Dutch only.
- Article number
- product number
- Input tension
- 220 - 240 Volt AC
- Output tension
- 1 - 25 W/VA
- Number of inputs
- Number of outputs
- 115 x 61 x 34 mm
- 2 years
There are no reviews written yet about this product..