This duo wall dimmer is suitable for dimmable incandescent lamps, energy saving lamps, halogen lamps and 12V LED lamps of minimum 5 and maximum 75 Watt. Read more.
This duo wall dimmer 230V, 2x 5-75W/VA is suitable for dimming LED (filament), halogen and light bulbs. Phase cut-off dimmer R,C which prevents hum in both the dimmer and the connected LED lamps.
This dimmer has a soft start for a favourable influence on the life span of the applied LED lamps. Of both channels, the minimum and maximum dimming position can be adjusted by means of the adjusting screws. The dimmer is easy to install in a single, standard flush-mounting box.
Light sources
On a dimmer, you use dimmable light sources. The quality of the LED lamp determines how well it dims. The Tradim 2482 duo wall dimmer is suitable for the following lamps:
|
|
LED lamps |
 |
Halogen bulbs |
|
|
Incandescent lights |
* Depending on lamp and driver/transformer combination
Cover plate and dimmer knobs
The Tradim 2482 duo Wall Dimmer is supplied without cover plate and dimmer knobs. You can easily order these here. The standard switching materials from Busch Jaeger, Jung, Berker and Peha can be added to this dimmer.
Installation
Always connect the dimmer according to the wiring diagram provided. Do you have no knowledge of electricity? Then have this done by a professional! The dimmer fits into standard flush-mounting boxes.
TIP! Always test the dimmer before fitting it in the wall. Damaged dimmers due to screwing are not covered by our return policy.
Wall dimmers
Wall dimmers, installed in the wall, allow you to adjust the light intensity in a room. They improve the atmosphere for different occasions and save energy by reducing power consumption. They also extend the life of lamps. These versatile devices are valuable additions to both domestic and commercial spaces.
Warranty
We offer a 2-year warranty. This dimmer also has a KEMA quality mark. This quality mark stands for the highest inspection in safety and lifespan. Because the 2482 duo Wall Dimmer has no peak voltage, this has no consequences for the lifespan of your lighting.
The quality of the lamp determines how and/or how the LED lamps can dim.
