Tradim 611070 LED floor dimmer 12 volt
Tradim brings the first 12V LED floor dimmer to the market!
This floor dimmer model 611070 is suitable for LED. The power is from 1 to 25 W/VA.
The dimmer works according to the principle of PWM (Pulse-Width Modulation), this is a modulation technique in which pulses are emitted in a fixed frequency of which the width is varied.
The advantages of the PWM dimming technique are:
- flexible dimming possibilities;
- more accurate output levels;
- better color consistency between the various levels.
Thanks to this modulation technique, this dimmer is very suitable for dimming LEDs.
By means of the slide switch the lamp can be dimmed. In addition, the lamp can be switched off 100% by means of the pressure switch. Inside is a potentiometer with which the minimum dimmer setting can be adjusted. The dimmer has a soft start for a favourable influence on the life span of the applied led lamps. Dimming range in the low to 0.1%. Standby consumes only 0.3 watts.
Extremely suitable for: G4, MR11 and led strips.
This dimmer has been extensively tested with lamps from Philips, Eglo, Calex, Segula, etc.
Also available in black! Article number: 611072.
|Number of inputs:|
|Number of outputs:|